Senneco Inc.
division 3 concrete
division 4 masonry




SENNECO INC. specialised in construction products distribution and represented many Canadian and American manufactured.

Masonry, formwork and general contractors will find many specialised products, good service and expertise.

Established in 1984, SENNECO INC. has also developed a distribution network througout Canada, with exclusive products.

With more than twenty years of experience in this field, the new chairman, Robert Pilotte, will pursue this tradition of quality and service.

Sectors of activities :
commercial, industrial, residential
Exportation: yes

Masonry Products

  • Masonry anchors
    All models, gauges and finish are available.
    Examples:
    • "BL" anchors with simple or double pintle
    • "Bailey" type brackets
    • Brick ties
    • Double eyes & double pintles
    • Stabilisations & repair anchors
    • Column anchors
    • Stone & granit anchors

    Mill galv., hot dipped galv. & stainless steel finish
  • P.V.C. plastic brick vent
    • Standard
    • C.S.R.
    • Jumbo
  • Metal weep holes, zinc plated or stainless steel
  • Block reinforcing
    • Ladder type
    • Truss type
    • Truss-eye, etc…

    Gauges available:
    • Standard (standard 9ga.)
    • Heavy-duty (heavy-duty 9ga. & 3/16 ")
    • Extra heavy-duty (extra heavy 3/16 " & 3/16 ")
    • Mill galv. & hot dipped galv.
  • P.V.C. flashing (meets the standards ASTM D-412-61, ASTM D-822)
    Thickness 
    • 20 mill.
    • 30 mill.
    • 40 mill.

    Standard width, 12", 16", 18", 24" and 48" (other on request)
    Also available BAKORS’s blueskin SA
  • "DIEDRICH" products (masonry cleaners, waterproofing system)
  • Construction tarpaulins size 15’ X 20’

 

 

Concrete Products

  • P.V.C. waterstop
    Meet North American specs.
    All models, sizes and tichness available
    Standard Roll 50’ long (100’ long on request)
    Technical bulletin available
  • Heat sealing iron with teflon cover for waterstop
  • Fiberglass Hopper
    Sizes :
    • 36" X 36" with 8" diam. hole
    • 36" X 36" with 12" diam. hole
  • P.V.C. elephant trunk
    Sizes :
    • 8" diam. X 50’ long
    • 12" diam X 50’ long
  • Steel collars C/W welded chains (8" and 12" diam.)
  • Fibreflex expansion joint
    Made of compressed wood fibres, bitumen impregnated
    Thickness available : 3/8", ½", ¾" et 1"
    10’ long
    Cut to standard sizes : 4", 5", 6", etc…
  • Insulated concrete curing blankets
    Filled with foam or air bubble
    Size: 8’ X 25’
  • Wire loop ties and tools (spring return tool or hand tying tool)
  • Rebar wire 16 ga. (3-1/4 lbs. Donuts), 50 lbs/box
  • "Miracle" double form ties & 9 gauge X 50 lbs. form wire
  • Concrete repair mortars
    Non-shrink grout
    Sealer and curing compound
  • Key cold joint C/W metal stakes

 

 

 

Other Specialties

  • Portable vented heaters, OHV FROST FIGHTER
    • Type OHV-350 (320,000 BTU)
    • Type OHV-500 (420,000 BTU)
  • OHV FROST FIGHTER parts
  • 12" diam. X 12’ long canevas heater ducts for OHV heaters

Technical bulletin on request

 

 


Senneco Inc.

3400, Losch blvd., suite 23
St-Hubert, Quebec
J3Y 5T6
Telephone:
Toll Free:
(450) 443-6535
1-888-443-6532
Fax: (450) 443-6534
E-Mail: senneco@construnet.com

---copyright © 1999-2000--- Conceived, created and hosted by: